Condor Boot Care Guide
Proper care helps extend the life of your boots, maintain their appearance, and preserve warranty coverage. Follow these recommendations to keep your Condor boots performing at their best.
1. Clean Your Boots Regularly
Keeping your boots clean is the simplest way to extend their service life.
- After exposure to dirt, mud, or dust, wipe your boots down with a damp cloth.
- Use a soft brush to remove debris from seams, stitching, eyelets, and hard-to-reach areas.
- Avoid harsh soaps, detergents, or chemical cleaners that may damage leather, suede, or synthetic materials.
2. Dry Them Properly
If your boots become wet, proper drying is essential.
- Allow boots to air dry naturally at room temperature.
- Remove excess moisture with a clean towel if needed.
- Never place boots near heaters, radiators, campfires, dryers, or use a hair dryer.
- Excessive heat can dry out leather, weaken adhesives, damage materials, and shorten the life of your boots.
3. Care for the Material
Leather Care
Leather benefits from periodic conditioning to help maintain flexibility and appearance.
- Apply a quality leather conditioner every few months or as needed.
- Pay particular attention to flex points around the toe box and forefoot where creasing naturally occurs.
- Follow the conditioner manufacturer's instructions for application and frequency.
Suede Care
Suede requires specialized care and should not be treated with standard leather conditioners.
- Use a soft suede brush or cloth to gently remove dirt and dust.
- Brush in multiple directions to lift the nap and maintain the suede's appearance.
- Apply a suede-specific conditioner or protector designed to nourish and protect suede fibers.
- Regular treatment can help improve resistance to water penetration, stains, and surface scuffs.
- Focus on high-wear areas such as the toe box and sides of the boot.
4. Store Your Boots Correctly
Proper storage helps preserve both leather and suede materials.
- Store boots in a cool, dry location away from direct sunlight.
- Keep them away from heaters, radiators, or other heat sources.
- Avoid storing boots in damp environments that may encourage mold or material deterioration.
- For suede models, storing them in a dark location can help minimize fading over time.
5. Daily Use Tips
Loosen the Laces
Always loosen and unlace your boots before removing them.
Pulling boots off while fully laced places unnecessary stress on the heel counter, eyelets, stitching, and upper materials.
Inspect Your Laces
Regularly check laces for signs of wear or fraying and replace them when necessary to maintain proper fit and support.
6. Side-Zip Care (Applicable Models)
Keep the Zipper Clean
Regularly brush away dirt, sand, and debris from the zipper teeth to help prevent jamming and premature wear.
Fully Unzip Before Use
Always unzip the boot completely before putting it on or taking it off. This helps reduce stress on the zipper, stitching, and pull tab.
Do Not Force the Zipper
If the zipper becomes difficult to operate, inspect it for trapped fabric or debris before applying additional force. Forcing the zipper can damage the slider, teeth, or surrounding materials.
Keep It Dry
If the zipper area becomes wet, wipe away excess moisture and allow it to air dry naturally. Avoid direct heat sources that may damage zipper components.
Lubricate as Needed
If the zipper becomes stiff, apply a small amount of zipper wax or lightly rub a plain candle over the zipper teeth to help maintain smooth operation.











